Power On Settings - TTI QL Serie Manual De Instrucciones

Power on Settings

The following instrument status values are set at power on:
Status Byte Register
Service Request Enable Register †
Standard Event Status Register
Standard Event Status Enable Register †
Execution Error Register
Query Error Register
Parallel Poll Enable Register †
† Registers marked thus are specific to the GPIB section of the instrument and are of limited use in
an RS232 environment.
The instrument will be in local state with the keyboard active.
The instrument parameters at power on are the same as at last switch off with the exception of the
output status. By default this is always off at power on but the user may change this to the same at
power on as at switch off.
40
= 0
= 0
= 128 (pon bit set)
= 0
= 0
= 0
= 0