Publicidad
INSTRUCTIONS / INSTRUCCIONES / INSTRUCTIONS
3.
Close the cargo carrier. Pull up on the lid in the
front of the cargo carrier to be sure hinge tabs
4.
Set cross rails at 22" on center.*
*Cross rails on some vehicles are not adjustable and may require additional holes drilled into the bottom of the cargo carrier to match
the fixed position width. If this is the case, attach the cargo carrier to the rear cross rails first, using the pre-drilled holes. Then drill holes
in the front of the cargo carrier using the mounting back plate (C) as a template for the hole positions.
Front of
carrier
are engaged.
Mounting
Hole
Be sure to align the mounting holes in the box
bottom on each side of the cross rails.
bale latch
clip hook
Engage the bale latch on the front of the cargo
carrier. This bale latch stays in the closed position
going forward. Then secure with clip hook.
Carefully place the assembled cargo carrier
on the top of roof rack cross rails and center
on vehicle. Check for clearance of rear hatch
and antennas.
Mounting
Hole
5
Publicidad
