Setup; Connecting The Ac Power Cord - Citizen CT-S801 Type II Manual De Usuario

3. SETUP

3.1 Connecting the AC Power Cord

1. Turn off the power.
 For the built-in power type printer, connect the AC power cord to the AC inlet, and
2.
insert the plug into an electric outlet.
 For the AC adapter type printer, connect the cable connector of the AC adapter to
the power connector. Next, connect the AC power cord to the AC inlet, and insert
the plug into an electric outlet.
AC power cord
Built-in power supply type
CAUTION
 Use only an AC adapter that complies with the specified ratings.
 Always hold the AC adapter's cable connector by the connector when removing or inserting
it.
 Use an AC power source that does not also supply power to equipment that
generates electromagnetic noise.
 Pulling on the AC power cord may damage it, cause a fire, electric shock, or break a
wire.
 If a lightning storm is approaching, unplug the AC power cord from the electric outlet.
A lightning strike may cause a fire or electric shock.
 Keep the AC power cord away from heat generating appliances. The insulation on the
AC power cord may melt and cause a fire or electric shock.
 If the printer is not going to be used for a long time, unplug the AC power cord from
the electric outlet.
 Place the AC power cord so that people do not trip on it.
AC inlet
Cable connector
— 20 —
Power connector
AC adapter
AC inlet
AC power cord
AC adapter type