Holder For Remainders; Tilting By 30 Deg; Cleaning - Graef MASTER M 30 Manual De Instrucciones

be sliced best when cooled. Soft food can be
cut better when pushed slowly. When slicing
cucumbers or carrots, it is advantagous if they
are cut to equal lengths first which are then
fed using the holder for remainders.

Holder for remainders

The unit must not be used without the food
holder for remainders unless the size and shape
of the food permits use without.
As soon as the size or shape of the food permits
the use of the holder for remainers, this has to
be used.
Place the remainders or smaller food on the
● ●
slide.
Place the holder for remainders at the rear
● ●
wall of the slide and move the holder for
remainders up to the food to be cut.
Proceed as described above in chapter
● ●
"Cutting".
The holder for remainders permit slicing of
smaller food, such as mushrooms or tomatoes.
Tilting by 30 deg. (only Master M80)
The tilting function is especially useful
for cutting bread, hard-cured sausage and
vegetables. By means of the tilting function,
the natural gravity force of the product to be
cut is used for feeding.
Proceed as follows to tilt the unit:
Press the lock knob. The unit is unlocked.
● ●
Use the swivelling lever to pull the unit up
● ●
forcefully until it locks in audibly.
When the unit has been locked in audibly, it
● ●
is secured.
Now continue as described in the chapter
● ●
titled "Cutting operation".
After finishing the cutting process, swivel the
● ●
unit back.
Turn the swivelling lever down.
● ●
Press the rear part of the profile to lock the
locking bolt.

Cleaning

Use a soft and moist cloth to clean the outer
DE
EN
FR
NL
IT
ES
PYC
17