Figure 1 Exploded View Of Light - Federal Signal 24XST Instrucciones De Instalación Y Mantenimiento

Installation and Maintenance Instructions
To install the Model 24XST light:
See Figures 1, 2 and 3 below:
SHOCK HAZARD—To avoid electrical shock hazards, do not
connect wires when power is applied.
1.
Install the ceiling mount on the support surface using the four
external mounting slots.
2. Remove the terminal block from the ceiling mount by loosen-
ing the two mounting screws.
MAIN HOUSING
LENS-CLIP SCREW
LENS-CLIP
STROBE TUBE
8

Figure 1 Exploded view of light

LENS
Model 24XST
3/4" NPT CONDUIT
CEILING MOUNT
MECHANISM
ASSEMBLY
GLASS DOME
ASSEMBLY
GLASS DOME
290A7280