Figure 2 Exploded View Of Ceiling Mount - Federal Signal 24XST Instrucciones De Instalación Y Mantenimiento

3.
Connect the incoming positive side (+) of the power source to
the terminal marked L+.
4.
Connect the outgoing positive side (+) of the power source to
the terminal marked B.
5.
Connect the incoming negative side (−) of the power source to
the terminal marked N–.
6.
Connect the outgoing negative side (−) of the power source to
the terminal marked A.
7. If required by local building codes, connect the earth ground
wire to the green screw in the ceiling mount.
8. To prevent galling and ease maintenance, ensure that the
threads on the threaded joint are clean and lubricated with a
corrosion-inhibiting grease such as petrolatum or soap-thick-
ened mineral oils.
9.
Thread the fixture clockwise into the mount and tighten it
securely.

Figure 2 Exploded view of ceiling mount

EXTERNAL
MOUNTING SLOTS (4)
TERMINAL-
BLOCK SCREW (2)
Installation and Maintenance Instructions
THE CMXC-SB IS NOT SUITABLE FOR USE WITH
THROUGH-BRANCH CIRCUIT CONDUCTORS.
Model 24XST
CLOSE-UP
PLUG
TERMINAL BLOCK
290A7281
9