Fontanot lindy 030 b Manual Del Usuario página 7

Assembly of the Railing
12. Assemble the C28 parts by using the C13, B02 parts and insert them into the balusters (C12)
(fig. 1).
13. Insert the balusters (C12) into the F23 parts, blocking them by the B02 part.
14. The first balusters (C12) of the long side of every tread (L40) have to be cut.
15. Tighten the C28 part completely, by using the B02 part (fig. 1). For a correct assembly twist the
key at about 90° from the contact point.
Final Assembly
16. Control the vertical line of the whole stair and, if necessary, correct it by moving the N16 support
(fig. 1).
17. Disassemble the first tread (L40) and drill the floor with a Ø 14 mm tip in relation to the present
holes on the N16 support (fig. 1).
18. Insert the F20 parts and tighten completely (fig. 1).
19. Reassemble the first tread (L40) and fix the F01 part on the floor, in relation to the first baluster
(C12), by drilling with a Ø 8 mm tip. Use the C58, B12, B83 and B02 parts (fig. 1).
20. Insert the baluster (C12) and tighten the B02 part (fig. 1).
7 - ly