General Information; Design And Function - WIKA TR10-A Manual De Instrucciones

1. General information / 2. Design and function
Models concerned:
▶
These operating instructions are valid for a whole range of products. For a detailed listing
of these models see chapter 10 "Specifications" (page 28).
EN

1. General information

The thermometers described in the operating instructions have been manufactured
■
using state-of-the-art technology.
These operating instructions contain important information on handling the instrument.
■
Working safely requires that all safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety
■
regulations for the instrument's range of use.
Skilled personnel must have carefully read and understood the operating instructions
■
prior to beginning any work.
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant:

2. Design and function

2.1 Description
These resistance thermometers and thermocouples are used for temperature
measurement in industrial applications.
This document describes instruments in standard version. For applications in hazardous
areas special instrument versions are required.
For further information for operation in hazardous areas, see the additional information for the
corresponding ignition protection type (separate document).
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
4
www.wika.de / www.wika.com
see chapter 10 "Specifications"
Tel.: +49 9372 132-0
Fax: +49 9372 132-406
info@wika.de
WIKA operating instructions, models TRxx and TCxx