Procedure To Follow If The Appliance Is Not Going To Be Used For Some Time; What To Do In The Event Of A Breakdown; Maintenance (Only For Qualified Personnel) - Lotus FQ-4EM Instrucciones Para La Instalación Y El Uso

GB IE
IT CH
Before starting to clean the appliance, disconnect the power supply. The parts in steel must be washed with hot water and
neutral detergent, then rinsed thoroughly in order to eliminate all traces of detergent; after which, dried with a dry cloth.
Do not use abrasive or corrosive detergents.
To make cleaning easier, the elements may be turned by 90° in an anticlockwise direction.
After cleaning, turn the elements back correctly. There is a micro switch which shows the correct contact.
PROCEDURE TO FOLLOW IF THE APPLIANCE IS NOT GOING TO BE USED FOR
SOME TIME
Clean and dry the appliance carefully according to the instructions. Disconnect the power supply.

WHAT TO DO IN THE EVENT OF A BREAKDOWN

In the event of breakdown, turn off the appliance, disconnect the power supply by using the device situated above the
appliance and notify the after sales service.

MAINTENANCE (ONLY FOR QUALIFIED PERSONNEL)

Any kind of maintenance must only be done by qualified personnel. Before carrying out maintenance, remove the plug
or switch off the switch above the appliance.
22