PURLINE CHC300D Manual De Empleo página 7

changed by a qualified electrician or the
manufacturer to avoid any danger
7. Always close the power switch and unplug power
cord before servicing or moving the heater.
Always unplug heater when not in use.
WARNING : DO NOT DEPEND ON THE ON/OFF
BUTTON OR SWITCH AS THE SOLE MEANS OF
DISCONNECTING POWER WHEN SERVICING
OR MOVING THE HEATER.
ALWAYS UNPLUG THE POWER CORD.
8. Do not insert or allow fingers or foreign objects to
enter any ventilation or exhaust opening as it may
cause an electric shock or fire or damage the
heater.
9. To prevent a possible fire, do not block air intakes
or exhaust in any manner. Do not place heater on
soft surfaces, like a bed, where openings may
become blocked.
10. Always place the heater on a stable, flat, level
surface when operating, to avoid the chance of the
heater overturning. Locate the power cord so the
heater or other objects are not resting on it. Do not
run power cord under carpeting. Do not cover
power cord with throws rugs, runners, or the like.
Arrange power cord away from room traffic and
where it will not be tripped over.
11. This heater is hot when in use. To avoid burns, do
not let bare skin touch hot surfaces. Always use
handle when moving this heater. Keep
combustible materials, such as furniture, pillows,
bedding, papers, clothes and curtains at least 0.9m
from the front of the heater and keep them at least
0.3m from the sides and rear.
12. A heater has hot and arcing or sparking parts
inside. It must not be used in potentially
dangerous locations such as flammable, explosive,
chemical-laden or wet atmosphere.
13. This heater is not intended for use in wet or damp
locations. Never locate a heater where it may fall
into a bathtub or other water container.
14. This heater is intended for general use only.
15. Do not use the heater outdoors.
WARNING : REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK. DO NOT USE THIS HEATER
WITH ANY SOLID STATE SPEED CONTROL
DEVICES.
DESCRIPTION OF THE HEATER
When the appliance is switched on for the first time, a
slight smell may be emitted. Please ensure sufficient
ventilation. The smell will subside.
1. Thermostat.
2. Power knob.
3. Metal mesh.
4. Tip over switch.