Publicidad
Idiomas disponibles
Idiomas disponibles
GLOW PLUG SHAFT REAMER 1952 003 740 - MODULE 3
Before mounting the new glow plug, clean its seat using the proper
reamer (fig. 21).
Select the proper reamer according to the size of the glow plug.
APPLICATION
A
M8x1
M9x1
M10x1
M10x1.25
A
Select the proper centering according to the type of glow plug:
M8x1, M9x1, M10x1, M10x1.25
COMPONENTS
1952 003 591 - Reamer tool M8x1
1952 003 741 - Reamer tool M9x1
1952 003 693 - Threaded adapter M9X1
1952 003 352 - Reamer tool M10x1 with body
1952 003 742 - Reamer tool M10x1.25
1952 003 693 - Threaded adapter M9X1
Choose the threaded adapter accordingly to glowplug pitch, and
mount it on the reamer tool; now screw into the glowplug seat, and
start to operate by hand the reamer tool (fig. 21);
Use one of the two cleaning brushes provided to complete the
cleaning of the glow plug seat, especially the tip's seat:
1952 003 594 - Cavity seating brush with brass wire, Ø4,8 mm
1952 003 595 - Cavity seating brush with brass wire, Ø5,8 mm
1952 003 553 - Wrench 2mm
NB: We recommend to use WÜRTH dummy
injector code 1952 003 155 for blowing out
aluminium cuttings (fig. 21 ref.
Proceed with the insertion of the new glow plug (fig. 22, 23).
B
C
93°
Ø4 mm
93°
Ø4 mm
63°
Ø5 mm
121°
Ø5 mm
B
C
)
B
21
22
23
B
31
Publicidad
