Angelcare AC117 Manual De Usuario página 10

5.2 - ACTIVATING/DEACTIVATING THE SENSOR PAD
SET THE MOVEMENT DETECTION
Allows you to detect the baby's movements.
SET THE TIC FUNCTION
Allows you to detect baby's movements as well as hear a TIC sound.
IMPORTANT
To activate the ''TIC'' Function, the movement detection needs to be ON.
TO TEST THE SENSOR PAD
MOVEMENT FUNCTION NEED TO BE ACTIVATED:
1
10
2
1
2
1) Press and HOLD the MENU button until the
Movement monitoring
2) Use the UP and DOWN arrows to activate or
deactivate movement detection.
3) Press the OK button to go to the next setting
or press the EXIT button to confirm your
choice.
1) Press and HOLD the MENU Button then press
the OK button until the ''TIC''
blink. Use the UP and DOWN arrows activate
or deactivate the TIC function.
2) Press the OK button to go to the next setting
or press the EXIT button to confirm your
choice.
1) Move your hand lightly on the mattress.
NOTE:
The Parent Unit will emit a
''TIC'' sound (when activated) and
will flash every 5 seconds.
2) Remove your hand from the mattress.
After 15 seconds you will hear a
'TIC' pre-alarm sound, and 5 seconds
later the Movement Alarm will trigger.
3) Repeat by moving your hand lightly
in all four corners of the mattress.
icon blinks.
icons