1
Sensor Pad
Note: Each time you power ON your Nursery Unit, the internal thermometer will need to calibrate to ensure
accuracy. This automatic process will take approximately 30 minutes. The colour changing temperature display,
by default, will be turned "OFF". You may turn this feature "ON" in the settings mode on your Parent Unit.
NURSERY UNIT:
Power ON/OFF Light Indicator
Low Batteries Light Indicator
Microphone
Sensor Pad Indicator/
Temperature Indicator
2
MUST BE MORE THAN
3 FEET (1 METER) AWAY
5
Temperature
Indicator ON/
OFF/Pager
Power
ON/OFF
Speaker
1) Remove the batteries cover and insert
2 AAA Alkaline Batteries (not included)
Note:
• The batteries are a back up power
supply in case of power outage.
• When unplugging the adapter
from the Nursery Unit, be sure it is
switched to the OFF position. If it
isn't, the unit will revert to battery
mode if batteries are installed.
2) Install the Nursery Unit on a flat,
stable surface facing the crib at
a distance of at least 3 feet
(1 meter).
3) Check to make sure the Sensor Pad
has not moved from position.
4) Place the mattress back inside
the crib.
5) Connect the USB plug to the
Nursery Unit and then connect the
USB plug with the power adapter
and the electrical outlet.
Batteries
Compartment
Micro USB
Port
E
N
Pause Movement
Sensor Pad
Movement
Sensor Pad
Sensitivity
switch
7