Kenwood CHEF Titanium Manual De Instrucciones página 9

The bowl tools and some of their uses
K-beater
For making cakes, biscuits, pastry, icing,
fillings, éclairs and mashed potato.
Dough Tool
For yeast mixtures only.
Whisk
For eggs, cream, batters, fatless sponges,
meringues, cheesecakes, mousses,
soufflés. Do not use the whisk for heavy
mixtures (e.g. creaming fat and sugar) -
you could damage it.
To use your bowl tools
Ensure the cord is fully unfolded from the
cord storage compartment
using the Stand Mixer.
1 Plug in and the Standby Button
light up.
Note: The standby button light
will flash and the Stand Mixer will not
operate if the mixer head is in the
raised position or the speed control
is not in the 'O' position.
Before operating, check that the
mixer head is correctly latched down
and the speed control is in the 'O'
position. If the light continues to
flash refer to the 'troubleshooting
guide'.
2 Push the head-lift lever
raise the mixer head until it locks
Ensure the bowl seating pad
correctly fitted with the
uppermost.
3 Fit the bowl on the base, press down and
turn clockwise
4 Place the required tool into the socket.
Then push up
lock into position.
before
will
down and
.
is
symbol
to secure in position.
and turn the tool to
Note: If the K-beater or Whisk are
not picking up ingredients from the
bottom of the bowl refer to the "Tool
Adjustment" section.
5 Lower the mixer head by pushing the
head release lever down
the mixer head until it locks
6 Start the machine by turning the speed
control to the desired speed setting.
Use the pulse (P) position for short
bursts of maximum speed.
7 After use, return the speed control to
'O' OFF position and unplug your Stand
Mixer.
8 Release the tool by turning clockwise
to unlock from the tool socket and then
remove.
Hints
• The fold function
folding light ingredients into heavier
mixtures for example meringues,
mousses, fruit fools, Genoese sponges
and soufflés, and to slowly incorporate
flour and fruit into cake mixtures. The
mixer will operate at a constant slow
speed.
Important
Ensure that no bowl tools are fitted or
stored in the bowl when using other
outlets.
5
and lower
.
can be used for