TRAPP Master 1000 Manual De Instrucciones página 33

Trigger
Lock
At every 50 hours of use:
✔
Loosen the bolts (1), remove the bar (2) as
seen in the picture.
✔
Pull the inner flexible cord (3) for at least a
meter long, take it out and grease it,
mounting it back right after following the
inverse mounting order.
At every 30 hours of use:
✔
Fill the transmission gearbox with grease until
it overspills from the threading.
✔
To do this, remove the bolts (4) as seen in the
picture.
Switch
Before you start operating your MASTER 1000
mower you should study carefully how the
switch works - for this model, it is the trigger-
with-lock type.
It works in two ways:
One is by touch, by pressing the trigger down
with your finger.
The other is by activating the trigger with your
thumb - this way you can release the trigger and
the motor keeps running non-stop.
In this condition, simply activate and then
release the trigger to turn off the equipment.
Lubrication
1
Warning!
✔
Lubrication deadlines were established for
normal use conditions.
✔
Use only high rotation rolling bearing
grease.
3
2
4
31