TRAPP Master 1000 Manual De Instrucciones página 35

Recharging the spool is a quick and easy
procedure. Use only 2.4 mm gauge nylon
filament. Out of specification nylon filaments can
damage the motor, the spool running system and
consequently you'll loose the warranty.
1 - Loosen the spool-mounting butterfly.
2 - Remove the spool.
3 - Put the nylon filament in the spool case
winding it clockwise.
How to recharge the spool
4 - When you have finished winding the nylon
filament, run it through the mounting
grooving to keep it from unwinding.
5 - Assemble the spool back again, running the
nylon filament through the side holes.
6 - Use the butterfly to mount the spool on the
equipment.
33