Wren V3US Guía De Inicio página 19

Connect to your V3US using Bluetooth (cont.)
Select V3US15_xxxxxx. If
your source device asks for a
passkey, enter "0000" (four
zeros) and press "OK." The
Bluetooth indicator on the
V3US will blink amber two
times per second when pairing
is in progress .
(Figure 3)
A message will appear on
your source device to indicate
when pairing is complete,
In addition, the Bluetooth
indicator on the V3US will go
from blinking amber to solid
blue . You are now
(Figure 4)
ready to play music wirelessly
on your V3US.
Problem connecting? Visit wrensound.com/support for additional help.
36
To play music on your
Wren V3US, make sure that
Bluetooth is turned on and
the V3US has been selected
on your source device. Then
simply select your favorite
music on your device and play.
blinking solid
amber blue
Figure 3 • Pairing
Figure 4 • Connected
Using multiple Bluetooth devices on your V3US
Many households (and many individuals) have multiple Bluetooth-equipped devices that
they use for music. The Wren V3US can "remember" pairings with up to six different
Bluetooth devices, eliminating the need to go through the initial pairing process every
time you switch devices.
To pair additional devices with your
V3US, simply follow the instructions
under "Pairing with your V3US" on
pages 35-36.
When you switch the source on your
V3US from WiFi or Aux to Bluetooth
or when the Power button is pressed
to turn the speaker on from Sleep
or Standby mode while Bluetooth
has already been selected as the
source, the V3US will look for the
most recently paired device that
was connected to the speaker. If
that device is available, the V3US
will reconnect to it. If the last paired
device is not available, the V3US
will continue to search for the next
most recently paired device. It will
connect with the most recently paired
device that it finds.
When you wish to connect to
a specific paired device, select
Bluetooth as your source. Press
and hold the Source button on the
front of the speaker for three (3)
seconds. The Bluetooth indicator
will blink amber two times per
second indicating that the V3US
is trying to connect to a paired
device. Select V3US on the source
device. The Bluetooth indicator
will change to solid blue when an
active connection is established
.
(Figure 5)
Steps 4, next page
37