Powering On Your V3Us - Wren V3US Guía De Inicio

Powering on your Wren V3US
Connect power supply to AC outlet.
Connect power cord to power input
on rear of speaker.
The power indicator will flash white
for about 10 seconds, then turn off.
8
Press power button.
The power indicator will blink
white until the system is ready.
When the system is ready, the
power indicator will remain white.
solid white
If you are using WiFi to connect
(All wireless connection types except Bluetooth)
If you are using WiFi to connect, please check that the following are true:
• Your source device (smartphone, tablet, PC, etc.) is compatible. (For more
information on compatible devices, visit wrensound.com/support.)
• You know your wireless network (WiFi) name and password.
• Your wireless network is on and functioning properly.
• Your Wren V3US speaker is located in an area with ample WiFi signal strength.
ONCE YOUR V3US IS CONNECTED TO YOUR WIFI NETWORK, REGARDLESS OF HOW
YOU CONNECTED IT, THE V3US WILL EASILY CONNECT WITH ALL OF THE WIFI-
EQUIPPED SOURCE DEVICES THAT ARE ON THE SAME NETWORK AND COMPATIBLE
WITH YOUR V3US provided you have the appropriate app installed. In other words, once
you have used any compatible device to establish a connection between your V3US and
your wireless network, other compatible WiFi source devices on the same network will
recognize your speaker on the network and stream music to that speaker; you will not need
to go through another setup process.
9