Back Panel Connections And Settings; Speaker Controls - Wren V3US Guía De Inicio

Back Panel Connections and Settings

Setup Button
Used to enter various setup modes
EQ Adjustment
Adjusts bass output to
compensate for speaker
placement relative to
room walls
4
Service Port/Ethernet Input
Used for firmware updates. Also works as an
Ethernet input via RJ45 to USB connector.
3.5mm Aux Input
Connects any audio source via
a 3.5mm audio cable
Reset Button
Reboots speaker by
cycling the power
off and back on.
Power Supply Input
Connects to the power supply

Speaker Controls

Volume Up
Increases the volume.
Wifi Indicator
Indicates WiFi audio
source is selected.
Volume Down
Decreases the volume.
Power/Standby
Powers on and off the Wren speaker
To turn on, press and release the Power
button; to turn off, press and hold the
power button for 7 seconds
Volume Adjustment
Indicator
Flashes to indicate volume
being adjusted.
Source Selector
Selects the desired
audio input source.
Aux (3.5mm)
Source Indicator
Indicates Aux audio
source is selected.
Bluetooth
Indicator
Indicates
Bluetooth
audio source is
selected.
Power Status Indicator
For V5USP (portable) only: Any
light indicates power is on. White
light indicates the power supply is
connected; other colors indicate
remaining battery power (see next
page for details). For V5US (non-
portable): Solid white light
indicates power is on.
5