Jetboil ZIP Manual Del Usuario página 8

OPERATING INSTRUC
• Keep burner at arm's length, away from face, during ignition. Flame can flare
during ignition.
• Do not attempt to light with included pot or any other cookware on the burner.
Gas build-up can occur, resulting in increased flame eruption.
• Never expose stove to flammable vapors or liquids while lighting the burner. It
can cause an explosion or fire.
• Do not heat empty pot. Product will melt and potentially catch fire.
• Do not move, lift, or tilt stove with lit burner. Product damage or injury can occur
due to flaring.
• Do not fill above maximum fill line. This may cause boil-over, resulting in injury.
• If attempting to heat anything other than water, use care and stir frequently to
avoid boil over or scorching, which may result in product damage or injury.
• Always check that the burner is extinguished before disconnecting the fuel canister.
• Do not use for boiling oil or deep frying. Product damage or injury can occur due
to overheating.
Preparation:
1. Remove bottom cover (7.1) from bottom of the Jetboil pot (7.2). 2. Remove Pot
Support Warning Tag. 3. Add contents to the pot, cover with lid, but do not put the pot
on the stove yet. Now you are ready to light the burner.
Performance may be suboptimal if used in extreme conditions (cold, hot, wind, altitude).
NOTICE
Do not use stove to warm fuel canister. Can result in explosion.
WARNING
Lighting the Burner:
Ensure burner base is free of any pot prior to lighting. Gas build-up can
CAUTION
occur, resulting in increased flame eruption.
1. Hold lit match or lighter over top of burner (Fig 9).
2. Open control valve (8.1) counterclockwise until burner is lit.
Usage:
1. If necessary, rotate control valve (8.1) clockwise to decrease flame setting.
2. Once the burner is lit, carefully place the pot with its contents on the burner base
(Fig 10); turn as shown in Fig 11 to lock into place.
Use care when removing lid. Steam and/or contents may be hot and
CAUTION
7
can cause injury.
WARNING