GB
Fig.24
Fig. 25
1
40
All manuals and user guides at all-guides.com
CHAIN SAW OPERATING MANUAL
Fig.23
STOP
5. FUEL
1) ATTENTION! The equipment
is provided with a 2-stroke
engine.
The engine requires a mixture of petrol and oil for
2-stroke engines with the following percentage:
40:1 = (2,5% oil)
PETROL: use unleaded petrol with octane
number equal / higher than 95 Ron.
RECOMMENDED OIL
Top-quality oil for two-stroke engines:
Service class: JASO FC class
Warning! Using oil of lower quality than
the type above recommended,could
seriously damage the engine.
2) Mix by shaking the fuel
container extensively before
each refuelling.
Prepare a quantity of fuel that can be used
within 1 month.
3) Prepare the fuel mixture and perform the refuel-
ling only in the open air (Fig.23).
4) Store the fuel in a container made for the pur-
pose and with the cap properly closed.
6. CHAIN OIL TOP UP
1) ATTENTION! Top up only with a specific oil for
lubricating chainsaw chains (see Fig.24).
2) DO NOT use waste oil.
3) An oil other than that recommended may result in
damage to the bar, to the chain and to the lubrication
system.
Top up the chain oil tank every time you add
fuel.