Service, Maintenance And Care - diversey Taski Swingo 455B Traducción De Las Instrucciones Originales De Usщ

Service, maintenance and care

The maintenance of the machine is a prerequisite for impeccable op-
eration and a long service life.
Caution:
Use original TASKI parts only; otherwise any war-
ranty and liability claims will be invalidated.
Notice:
In order to rule out unintended machine functions,
before starting maintenance works the following
must always be carried out
- - the machine must be switched off,
Legend:
◊ = after every cleaning, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service light
Activity
Charge batteries
Replenishing distilled water (wet-cell
batteries). Observe the service sheet of
the battery supplier!
Draining and cleaning the recovery and
fresh water tanks
Clean all parts marked in yellow
Clean the brushes
Clean the suction nozzle, check the
blades for wear and change them if
necessary
Wipe the machine using a damp cloth
Clean the gasket of the tank cover,
check for cracks and replace it if neces-
sary
Maintenance and service program car-
ried out by Diversey service techni-
cians
Service intervals
TASKI machines are high-quality machines that have been inspected
for safety at the factory by authorized inspectors. Electrical and me-
chanical parts are subject to wear and aging after a longer period of
use.
• In order to maintain operational safe-
ty and readiness for use, the ma-
chine must be serviced whenever the
maintenance indicator lights up (fac-
tory setting is 450 working hours) or
at least once a year.
Notice:
In case of extraordinary use and/or insufficient
maintenance, shorter intervals may be required.
Service center
Please always indicate the type and number of the machine whenev-
er you contact us to place an order or in case of malfunctions.
You can find this information on the nameplate of your machine. The
address of your closest TASKI service partner is provided on the last
page of these instructions of use.
Blade replacement
• Unscrew the star knobs (1), pull the blade body (2) out of
the squeegee body and remove the blades (3).
● 6
• Now you can turn the blades or replace them.
• Put the blade body (2) back in the suction nozzle body and
screw the star knobs (1) back on.
● 6
● 10
●
● 10
● 9
● 10
●
●
1
2
3
11