Citizen CH-456 Manual De Instrucciones página 12

4
Pull the end of the cuff outwards so
that the cuff is snug around your arm
and then secure the end to the hook-
and-loop fastener.
5
Place your arm on a table or the like,
so that the center of the cuff comes to
the height of your heart.
6
Relax your arm and lightly open your hand, with the palm upward.
➌
Place the cuff at the height of the heart.
➍
Press the "
• All digits displayed is an initial display, indicating that the monitor is
functioning normal.
• The cuff is pressurized automatically.
* If the unit judges that pressurization is insufficient, it automatically
repressurizes.
* is displayed when a pulse is detected.
* When you want to stop measurement, press the "
The cuff is deflated and measurement stops.
* If the previous user had a high pressure setting, that high pressure will
automatically be used for the current measurement.
* If the pressurization value exceeds 280 mmHg, if pressurization feels
abnormal, or if you want to stop the measurement process, press the
" START/STOP" switch again. The cuff deflates, and the power turns off.
* Carefully place the cuff on your
arm, taking care to use the correct
tightness. The tightness is correct
if you can readily slide a finger
between the cuff and your arm.
START/STOP" switch.
- Eng 11 -
START/STOP" switch.