Citizen CH-456 Manual De Instrucciones página 13

➎ The measurement results are displayed.
Hypertension
classification indicator
( See page 13)
➏
Finishing measurement.
• Press the "
• After taking the blood pressure measurement, pressing the "
STOP" switch will turn the monitor off. However, if you do not press the
switch, the monitor's Auto OFF function will automatically turn the monitor off
after 3 minute.
[Manual pressurization]
• If your systolic blood pressure is expected to exceed 200 mmHg, use Manual
pressurization when taking a measurement.
• Keep " START/STOP" switch held pressed until the pressure value you want to
stop pressurization is reached (approximately 40 mmHg higher than the Systolic
blood pressure). You can stop pressurization by the unit by releasing the switch at the
aforementioned value is reached.
The upper pressure limit is 280 mmHg
The Body movement indicator is displayed on the measurement results
display if you move your hand or arm during measurement, causing a
substantial pressure change to be detected.
• If the Body movement indicator is displayed, measure your blood pressure
again.
If an irregular heartbeat is detected during measurement, the Irregular
heartbeat (IHB) indicator is displayed after measurement is completed.
An irregular heart beat is defined as a heart beat that varies by ±25%
from the middle of 5 heart beat intervals during the blood pressure
measurement.
• Measurement may not be correct if your heartbeat fluctuates greatly during
measurement. If the Irregular heartbeat (IHB) indicator is displayed, measure
your blood pressure again.
Caution
START/STOP" switch to turn the monitor off.
If the Irregular heartbeat (IHB) indicator appears frequently, you
are advised to consult a doctor about your health condition.
- Eng 12 -
• Once measurement is complete, the
cuff deflates and the measurement
results (systolic/diastolic blood pressure
values, pulse) are displayed.
* Provided there is no error in the
measurement results, they are stored
automatically.
START/