Rampage Trailview Tonneau Top Instrucciones De Instalación página 8

Installation Steps
Attach the latch to the metal flange. Adjust the hook to fit with slight tension when latch is closed. Tip: Turn screw for tighter latch.
31
Wrap the 2 straps attached to the main section of fabric around the rear-
middle of the sound bar. Insert plastic hooks into the holes on the undeside
of the sound bar. Tighten the strap until snug.
32
Wrap the straps around the roll bar oward the inside of the Jeep, then back up to the strap adjustment buckle. Tighten and repeat for the passenger side.
Adjust each side to position the top evenly.
34
Locate the ceiling adjustment straps at the corners of the ceiling panel. Wrap
the straps around the roll bar oward the inside of the Jeep, then back up to
the strap adjustment buckle.
33
8