Important - Husky 31313 Instrucciones De Montaje, Instalación, Funcionamiento Y Mantenimiento

d) Shims 30703 are provided to adjust crossmember and uprights. Use only if necessary for alignment.
Crossmember
Upright
e) NOTE: See page 10 for complete height adjusting instructions.
IMPORTANT: The ideal centerline location of the 5thWheel Hitch should be positioned
between 1" and 3" forward of the Center of the Rear Axle once installed in the base rails.
This position may be limited by your specific base rail installation. Always verify this
information before towing down the road and also confirm that you will have adequate
turning clearance between the back of the truck cab and the nose of the 5
All Products limited to Vehicle Tow Rating; see Vehicle Owners Manual. See
Warranty Information / Tech Support ©2014 Husky Towing Products June 3, 2014-REV 4
Shim 30703
6 of 61
Place shim on either
side as needed
Torque lock nuts to 75 ft. lbs.
th
wheel trailer.
www.huskytow.com for