Ahu Maintenance And Filter Change; General; Filter Change - MURPROTEC CTA Instrucciones De Uso

Ocultar thumbs Ver también para CTA:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 52
7. AHU MAINTENANCE
AND FILTER CHANGE

7.1. General

The AHU indicates whether the filter has to be changed by showing "Change filter."
Nevertheless, we recommend you check your system regularly. During the pollen season, the grilles and ducts may get
clogged very rapidly. A simple cleaning (inside the device and outside using a vacuum cleaner) makes it easier for air to
pass through your system..
IN ANY EVENT:
THE GRILLES, AIR DIFFUSERS AND DUCTS MUST BE CLEANED SEVERAL TIMES A YEAR.
ATTENTION : Not changing the filter may cause the following:
• Reduced flow rate and risk of condensation problems reappearing.
• Premature clogging of the ducts and the unit through resettlement of dust.
• Increased air circulation noise.
The filter installed initially is a category G4 filter capable of filtering particles of 10 microns and more than 90%.
We advise you to get your filters from Murprotect, whose phone number is indicated on the control panel: they are
thoroughly familiar with our equipment and the programmed settings. There are many types of filter and it is necessary
to use one that complies fully with the dimensions and initialised filtering category.
A change or adaptation of a filter category would lead to serious malfunctions, possible discharges of toxic or foul sub-
stances inside your home, and loss of warranty. In case of problems, do not hesitate to contact your supplier.

7.2. Filter change

7.2.1. General
When the filter has reached its working life, the control panel indicates "Change filter." It is time to proceed to the annual
maintenance of your system.
Each time you remove the filter or after a power outage, the control panel asks you whether you have put in a new filter.
Take advantage of the opportunity to clean inside the cover and the air inlet duct, if deposits appear; all you have to do is
unscrew the 4 retaining thumbscrews and remove the protection grille.
Tip: Use a vacuum cleaner to remove dirt. Then scrub with a damp cloth to remove dust. Use a dry cloth to dry.
Do not forget to put back the grille which comes in useful in preventing elements such as leaves and other objects from
clogging the filter prematurely.
47

Publicidad

Tabla de contenido
loading

Productos relacionados para MURPROTEC CTA

Tabla de contenido