Auto Stim (Automatic)Function - RehabMedic Pro Stim 4 Manual Del Usuario

If you need to stop a program before its end, turn off the device by pressing the OK button for 3
seconds.
HOW TO VISUALIZE THE TOTAL TIME REMAINING
During the execution of a program, the remaining time of the phase in progress is displayed.
Note: The remaining time will be displayed in minutes, while seconds will be displayed in the
last 59 seconds.
HOW TO MODIFY THE PARAMETERS OF THE WORKING PHASE -RUN TIME
Once a program has started, it is possible to modify:
- time
- frequency
- amplitude
To modify the parameters of the phase in progress, press the Function button; a new screen
appears and the phase time is highlighted.
Modify the time pressing the P+ and P- button of the keyboard.
The new time will be automatically confirmed after 5 seconds or by pressing the FN button.
Move to the other parameters that you want to modify by pressing the LEFT/RIGHT buttons and
repeat the above mentioned process.
How to skip a phase
In order to pass to a next phase before the end of the one in progress, press the RIGHT button
for 3 seconds. To return to the previous phase, press the BACK button for 3 seconds.
How to increase or decrease intensity
To change the intensity of a single channel, use the corresponding INCREASE
or DECREASE INTENSITY button. To simultaneously increase or decrease the
intensity of all channels, use the P+ and P- button.

AUTO STIM (AUTOMATIC)FUNCTION

Available only for EMS and TENS currents
The AUTO STIM function enables the user to execute a program automatically, i.e.
without having to regulate the intensity. Intensity values are automatically set to
the levels used during the last execution of the same program. In any moment,
the user can exit from the AUTO STIM mode by modifying the intensity, using the
buttons to regulate the intensity.
The AUTO STIM function can be used only for programs listed among the "Last 10" list. (See
"Last 10" function)
From the main menu select "Last 10" and confirm with the OK button.
Note:
- To execute a program in AUTO STIM mode, it is necessary to apply the electrodes on the position
and muscular group (or body part) chosen for the previous execution of the same program.
Intensity values are specific to each channel.
- When using AUTO STIM mode, each user must access the electrostimulator with a personal
user code (USER).
Last 10
The electrostimulator stores (like a mobile phone) the last 10 executed programs, so
that these are available for rapid and easy execution.
The storage occurs automatically at the end of each program; when the memory is
full, older programs are automatically deleted.
46