Introduction To The "Programming" Menu; Parameters Setting - RehabMedic Pro Stim 4 Manual Del Usuario

confirm with OK.
b) The Program list menu
Choose the first program as indicated in the paragraph Program selection from the Program list
menu.
After selecting the first program it is possible to execute it on the 4 channels (START) or, selecting
the "proceed to mode 2+2" , to execute the multiple treatment. To execute the multiple treatment
follow the operations above mentioned in points 5, 6, 7 , 8. Once the 5, 6, 7 , 8 operations are
finished, it will be possible to execute both the programs increasing the intensity of the different
channels.

INTRODUCTION TO THE "PROGRAMMING" MENU

The Electrostimulator offers the possibility of creating new programs and modifying
existing ones.
This makes the PRO models highly flexible and adaptable to all users' requirements.
From the "Programming" entry of the main menu, it is possible to create a new
program (when the message EMPTY appears) and to execute already personalized
programs. These programs can be modified at any time (see the section "How to modify a
program" below).
The programs created with this function are the same for all USERS and cannot be memorized
in the "Last 10" list nor in the "Favorites" list.
How to create a new program
From the main menu, move the cursor to "Programming" using the P+ and P- buttons and
confirm with OK.
Use the P+ and P- buttons to select a number (from 1 to 5) for the program you wish to create
and confirm with OK.
NOTE: If the program has already been created, see "How to modify a program" below.
To name the new program, use the LEFT and RIGHT buttons to select letters and confirm with
OK. To delete a letter, move the cursor on DELETE and confirm with OK.

PARAMETERS SETTING

Use the P+ and P- buttons to select the desired parameter and confirm with OK. If any error
occurs, press and hold the LEFT button for 2 seconds to return to the previous screen.
STEP 1. Stimulation type setting (EMS, TENS)*
After inserting the name of the new program, use the P+ and P- buttons to select the desired
type of stimulation and confirm with OK.
STEP 2. Phase number setting
After setting the program stimulation type, press OK and select with the P+ and P- buttons the
total phase numbers and confirm with OK.
STEP 3. Phase time setting
After setting the phase numbers of which the program is composed, press OK and select the
duration of the first phase using the P+ or P- buttons and confirm with OK.
The procedure executed until now is the same for every type of program you wish to create.
Depending on the selected stimulation type in STEP 1, the different parameters of the current
type will be proposed.
If the program presents more phases, the next required phase will be automatically proposed at
the end of the insertion of a phase.
* The programmed stimulation types vary according to the model.
How to modify a program
Inside the "Programming" menu, select the program number you wish to modify and press at the
same time the "fn" + P+" buttons.
48