Handling; Configuration; Warnings; Preliminary Checks - Focotto ConoGrill Manual Del Usuario

FOCOTTO srl
Via Pasquinelli, 7/A
60035 Jesi (ANCONA) – ITALY
tel. +39 0731 200882
fax. +39 0731 690584
e-mail: info@focotto.com

HANDLING

The weight of the barbecue-brazier is indicated in this manual and on the plate glued to it. Given its size and
weight, it can be moved manually by at least two people at the same time. The barbecue must be gripped by
its main body (4), using the front and rear knobs as grip points.

CONFIGURATION

Warnings

The lighting system (natural and / or artificial) of the area of preparation for use must ensure the following
minimum illuminance values: 200 lux.
All products are tested and fine-tuned by the manufacturer before shipping and delivery to the customer.
The product has been designed, manufactured and tested to meet all specific standards (see the declaration
of conformity), if configured in a workmanlike manner.
If the configuration, use and / or maintenance of the barbecue-brazier are not carried out in a workmanlike
manner, anomalies may occur during use, and safety problems may also occur. Inappropriate configuration
and maintenance will void the warranty terms.
ATTENTION
THE BARBECUE-BRAZIER CAN ONLY BE STARTED AFTER IT HAS BEEN
CONFIGURED CORRECTLY.
Before configuring and commissioning the barbecue-brazier, completely remove any protection from dust or
humidity and any packaging material.

Preliminary checks

Check for any damage
Check that the various parts of the barbecue-brazier do not show physical damage due to impacts, tears or
abrasions.
Check in particular:
• that there are no signs or dents, indicative of impacts occurred during transport.
Damage Reporting Procedure
If any damage is found, stop the procedure in progress and report the nature of the damage to the
manufacturer's customer support office.
Configuration
• Place the product in an environment that complies with the requirements indicated in the "Locations"
paragraph.
• Remove the product from its packaging, making sure to free it from all its packaging
• Install the stainless steel bulkhead in the front of the ConoGrill, making sure to correctly hook the
bulkhead supports onto the product body
• Refill the brazier with charcoal or wood
• Turn on the barbecue-brazier following the requirements indicated in the paragraph "Use Procedures"
36