Technical Specification - Commercial Care CCSC30 Manual Del Usuario

OPERATING INSTRUCTIONS
AFTER THE MACHINE IS USED
1. After the steamer is used, unplug the power cord and disconnect the
power supply .
2. Press down the steam button to release the pressure until no steam is
injected out.
3. Slowly unscrew the safety cap but do not remove it, and residual steam
will be discharged slowly until no steam comes out. Then place the
machine in a cool place to cool it down for about five minutes. Finally,
completely remove the safety cap.
4. Empty the residual water in the tank and clean the external surface with a
piece of dry cloth.
5. At last, re-install the safety cap onto the machine body and tighten it in
position.

TECHNICAL SPECIFICATION

Technical Specification
Rating of power supply: AC11O - l20V-, 60Hz
Tank capacity: 350ml
Max capacity of water cup: 175ml
Rated power: 1200W
Steam pressure: 2.5 - 3.Sbar
Injected steam capacity: 30g/min
Temperature controller: functioning temperature: 135°C
Overall dimension: 295X 140X220mm
Net weight: 1.85kg
Page 10