Operating Instructions - Commercial Care CCSC30 Manual Del Usuario

OPERATING INSTRUCTIONS

1. Unpack the product, and make sure the unit and all the accessories are
not damaged.
2. Before use, please read the user manual carefully. Please note this Steam
Cleaner is for Household purpose only.
3. Filling Water: Place the Steam cleaner on a flat surface, and push down
the safety cap on the unit and unscrew by turning the cap counter clock
direction, and then place the funnel on the unit and add 175 ml of cold
water into the tank by using the measuring cup and close the safety cap.
CAUTION: Do not add anything except cool water or you will cause
damage to the heating element and void your warranty.
NOTE: Do not use more than 200ml of water at any given time.
4. Plug the unit into the electrical outlet and turn on the power supply, the
heating pilot lamp lights up indicating the steam cleaner is heating Up.
5. The operating temperature is reached in approx. 4 min and the red pilot
light turns off indicating the steamer is ready to use. Press the steam
button to make sure the steam is sprayed out of the nozzle.
CAUTION: To reduce risk of injury from steam, never point product at
people, animals, or electrical outlets.
6. Release the steamer button and attach the suitable accessory based on
the requirement and spray as required by pressing the steam button.
CAUTION: Keep face and all exposed skin away from steam. Failure to do
so may result in personal injury.
CAUTION: Thermal shock can shatter glass. Before cleaning cold glass
surface, carefully warm the surface by directing the steam jet
on the glass from a distance of no less than 4 - 6".
turn left
Page 7