Kärcher K 5.65 Manual De Usuario página 7

STEP 9:

Install the supplied connector to the
unit's water inlet.
Note: Never attach the garden hose
connector to the unit's water inlet!
STEP 10:

Insert one end of the high pressure
hose into the trigger gun until it locks
audibly.
STEP 1:

Insert one end of the high pressure
hose tightly into the quick connect on
the unit, it will lock in audibly.
Note: Make sure the connection nip-
ple is aligned correctly. Check the
connection by pulling on the high
pressure hose.
Check the secure connection by pull-
ing on the high pressure hose.
All manuals and user guides at all-guides.com
OPERATING INSTRUCTIONS
Note: Make sure the connection nip-
ple is aligned correctly. Check the
connection by pulling on the high
pressure hose.
Check the secure connection by pull-
ing on the high pressure hose.
Disconnect:
Press the disconnect key on the trig-

ger gun and remove the high pres-
sure hose from the trigger gun.
STEP 2:

Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
STEP 3:

Screw the supplied garden hose con-
nector on to the end of your garden
hose.
English 7