SPORT-ELEC Globalstim Manual De Uso página 8

segment.
- Segments from 8 to 10: there are 7 power levels, or 7 successive presses on the «+» key in order to display the following
segment.
E nd of the program - Stop during the program
4
At the end of the program, the device stops automatically.
f f
To stop the device during the program, bring the 2 power levels back down to zero («-» key), or press the «ON/OFF» key.
f f
Emergency stop: press the «ON/OFF» key.
f f
D isconnection
5
Your device is equipped with an electrode disconnection detector.
If there is no contact between the electrode and the human body, the flow of current on the motor unit concerned is interrup-
ted.
The first bar of the bar graph relating to the corresponding unit (master or slave) flashes to warn you of a disconnection.
If none of the electrodes are in contact with the skin, no current is passed, and the first two bars of the bar graphs flash.
C hecking the battery levels
6
Battery level low: bars n°6 on each bar graph flash (see diagram chapter V.3).
Battery level critical: bars n°10 on each bar graph flash, then the device turns itself off (see diagram chapter V.3).
To charge the device, connect the charger provided to the rear of the master unit.
IV. PROGRAMS
P reparation (20 min.)
1
20 minutes to prepare and warm up your muscles prior to
your sports session. Frequencies vary periodically and are
graduated in order to provide a genuine massage effect.
S ilhouette sculpt (40 min.)
2
40 minutes of body building to firm up and increase muscle
volume following a period of inactivity. This program is ideal
for keeping the body firm and for re-shaping your silhouette.
Frequencies vary from 30 to 60 Hz alternated with frequen-
cies of 10Hz and 3Hz for active recovery in order to build up
muscle resistance.
M uscle tonic (20 min.)
3
20 minutes of sustained body building to work on target
areas. Frequencies vary from 70 to 100 Hz alternated with
frequencies of 3Hz for active recovery in order to build up
muscle tone and strength.
12
- USER MANUAL
S udoloris (TENS Pain relief) (20 min.)
4
20 minutes to relieve muscle fatigue and enable you to
recover following exercise. This program effectively relieves
the pain associated with muscle tension.
R ecovery (20 min.)
5
Thanks to rapid frequency changes, this program allows the
muscles to recover faster through its relaxing effects.
D evelopment (40 min.)
6
This program helps to improve muscular fitness.
F itness (20 min.)
7
This program maintains muscular endurance, resistance
and volume.
M assage (Endorphinic) (20 min.)
8
Frequencies vary periodically, and provide all the benefits of
a relaxation massage.
V. DESCRIPTION
C ontents of the box
1
2 glObalStim motor units: 1 master unit + 1 slave unit
f f
1 electro-stimulation belt with snap fastener fixations
f f
2 adhesive electrodes with snap fastener fixations
f f
1 master/slave motor unit connection lead extension
f f
1 belt extension (for larger sizes)
f f
1 mains adapter
f f
this instruction manual
f f
2 . Description of the units
2
7
3
4
1 5
2 6
8
9
C harging the battery
3
The device contains a rechargeable battery; immediately following purchase, simply charge it for 3 hours by plugging the master
unit into the mains power supply.
It is not possible to use the device whilst the battery is charging.
If the device remains unused, charge the battery for 3 hours every 4 months.
Automatic stop function: The device turns itself off after 5 minutes of inactivity if:
No keys are pressed
No impulse is delivered
Battery level low: bars n°6 on each bar graph flash.
Battery level critical: bars n°10 on each bar graph flash, then the devices turns itself off.
To charge the device, connect the charger provided to the rear of the master unit.
Whilst the battery is charging, the bars on the two bar graphs light up successively one after the other, indicating that the
f f
charging is in progress.
Once the battery is charged, the 2 bar graphs flash at the same time.
f f
When the charger is unplugged, the indicator goes out.
f f
Q uick function test
4
Test the device on your biceps:
Connect 1 adhesive electrode to your master unit (see the connection procedure in the user manual).
f f
- USER MANUAL
MASTER UNIT
1. ON/OFF/emergency stop key.
2. Program selection key.
3. Program indicator.
4. «Master» channel 1 power level indicator.
5. «Master» channel 1 increase power key
(level 0 to 64).
6. «Master» channel 1 decrease power key
(level from 64 to 0).
SLAVE UNIT
7. «Slave» channel 2 power level indicator.
8. «Slave» channel 2 increase power key
(level 0 to 64).
9. «Slave» channel 2 decrease power key
(level from 64 to 0).
n°6 n°10
13