6. Place the Bottom Door on a smooth, fluffy surface with the panel facing up. Loosen
the screws (3) and separate the parts (2) and (1). Turn the part (1) 180º and then
install the parts (1) and (2) in the left position with the screws.
7. Replace the cover of the screws from the left side to the right (as shown in the
image).
8. Place the refrigerator on a straight and smooth surface, remove the part (2) and
loosen the screws (4). Remove part (1) and (3).
9. Unscrew the lower hinge part, change it to the nearest hole and then screw the joint.
26