Descargar Imprimir esta página

Steinberg Systems SBS-MD-12 Manual De Instrucciones página 44

Ocultar thumbs Ver también para SBS-MD-12:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 183
Control panel
MODE: Allows the user to select the device operating mode (The metal detector has
three operating modes: DISC; ALL-METAL; NOTCH-DISC)
SET: Using the SET button you can select the SENS or DISC / NOTCH mode on the
display.
ACC / REJ: This function in the NOTCH mode allows you to accept or reject targets that
were set in the elimination mode.
- / +: With these buttons you can increase or decrease the discrimination range of the
device.
GND TRAC: Finds a buried metal object. This function only works in ALL-METAL mode.
VOL: the ON / OFF switch, also used to adjust the volume of the device.
GND BAL: Compensates for the mineralization effect in ALL-METAL mode. Start
searching for a target by turning the GND BAL knob to P.
PHONE: Headphone socket - If you want to disconnect the internal speaker, push a
3.5mm headphone plug into the socket.
Display

Publicidad

loading

Este manual también es adecuado para:

Sbs-md-13Sbs-md-14Sbs-md-15Sbs-md-16Sbs-md-17