Commissioning; Alignment; Check The Application Conditions - SICK WLD16 Instrucciones De Uso

7

Commissioning

7.1

Alignment

7.2

Check the application conditions

8020352.1DS6/2021-11-24 | SICK
Subject to change without notice
Table 7: Alarm / Health
Align the sensor with a suitable reflector. Select the position so that the red emitted
light beam hits the center of the reflector. The sensor must have a clear view of the
reflector, with no object in the path of the beam
the optical openings of the sensor and reflector are completely clear.
Figure 10: Alignment
Adjust the distance between the sensor and the reflector according to the correspond‐
ing diagram [see table 8] (x = sensing range, y = operating reserve).
ADDITIONAL FUNCTIONS
Alarm (≤ 100 mA)
+ (L+)
Alarm
‒ (M)
+ (L+)
Alarm
‒ (M)
[see figure 10]. You must ensure that
O P E R A T I N G I N S T R U C T I O N S | WLD16
6
Health (≤100 mA)
+ (L+)
Health
‒ (M)
+ (L+)
Health
‒ (M)
19
en