Adjusting Contrast - Franke FMY 45 CM XS Manual De Instalacion Y Uso

Press the icon (B9) and the appliance displays
X
"DESCALE PLEASE CONFIRM".
Press the icon (B9).
X
The message "ADD DESCALER PLEASE
„
CONFIRM" is displayed.
Empty the tank of water, pour the contents of
X
the descaler bottle into the tank respecting the
instructions given on the descaler pack, then add
water.
Position a container with a capacity of about
X
2 litres under the hot water spout.
Press the icon (B9). Descaler flows out of the
X
hot water spout into the container below. The
appliance displays: "DESCALING".
The descale programme automatically performs
X
a series of deliveries and pauses.
After about 30 minutes "DESCALE COMPLETE
X
PLEASE CONFIRM" is displayed.
Press the icon (B9). "RINSING PLEASE
X
CONFIRM" is displayed.
Empty the water tank, rinse to eliminate descaler
X
residues, then fill with clean water.
Replace the tank full of clean water. "RINSING
X
PLEASE CONFIRM" is displayed again.
Press the icon (B9) again. Hot water flows
X
out of the spout into the container below and
"RINSING" is displayed.
Wait until "RINSING COMPLETE PLEASE
X
CONFIRM" is displayed.
Press the icon (B9). "DESCALE COMPLETE" is
X
displayed, then "FILL TANK". Fill the tank again
with clean water.
The descale programme is now terminated and
X
the appliance is ready to make coffee again.
Note: If descaling is interrupted before
X
completion, the process must be begun again
from the beginning.
IMPORTANT: Failure to descale the
Appliance regularly invalidates the Guarantee.
Resetting default values (reset)
If you change the original values, the default values
can be reset as follows:
Press the icon (B2) to enter the menu and
X
then the icons
TO DEFAULT" is displayed.
Press the icon (B9) and the appliance displays
X
"RESET TO DEFAULT PLEASE CONFIRM".
Press the icon (B9) to reset the default values.
X
(B7) and (B8) until "RESET
FMY 45 CM XS
Statistics
This displays statistics relating to the machine.
X
To display, proceed as follows:
Press the
X
the icons
displayed.
Press the
X
Press the icons
X
– How many coffees and cappuccinos have been
made.
– How many times the machine has been descaled.
– The total number of litres of water delivered.
Press the icon
X
twice to exit the menu.
Buzzer
This activates or deactivates the buzzer emitted
by the machine each time an icon is pressed or an
accessory is inserted/removed.
The buzzer is active by default.
Press the
X
the icons
displayed.
Press the
X
CONFIRM" is displayed.Press the
disable or the
Press the
X

Adjusting contrast

To increase or reduce the contrast of the display,
proceed as follows:
Press the
X
the icons
displayed.
Press the
X
Press the icons
X
required display contrast is reached. The
progressive bar indicates the level of contrast
selected.
Press the
X
Press the
X
or twice to exit the menu.
– 11 –
icon (B2) to enter the menu and then
(B7) and (B8) until "STATISTICS" is
icon (B9).
(B7) and (B8) to verify:
(B6) once to exit the function or
icon (B2) to enter the menu and then
(B7) and (B8) until "BUZZER" is
icon (B9). "BUZZER PLEASE
icon (B9) to enable the buzzer.
icon (B6) to exit the menu.
icon (B2) to enter the menu and then
(B7) and (B8) until "CONTRAST" is
icon (B9).
(B7) and (B8) until the
icon (B9) to confirm.
icon (B6) once to exit the function
EN
icon (B6) to