Legrests; Swing-Away Legrests; Adjusting The Lower Leg Length; Angle-Adjustable Footplates - B+B Pyro Light Optima Manual De Instrucciones

Ocultar thumbs Ver también para Pyro Light Optima:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Pyro Light Optima
Pyro Light Optima XL
4.2.

Legrests

1
4.2.1.

Swing-away legrests

2
You can flip the footplates up separately to the side and adjust to the
lower leg length of the user. You can remove the legrests, swing them
away and refit them without needing to use tools.
6.
Attach legrests
Hold the top of the legrest so that it is pointing outwards.
Guide the legrest into the hole in the frame using the guide bolts
(Fig. 6).
Swing the legrest to the front until you hear it clearly click into
place (Fig. 6)
Flip the footplate down if necessary.
Swing the legrests away and remove them
7.
In order to make it easier to transfer to and from your folding
wheelchair, you can swing the legrests inwards or outwards, without
having to remove them.
Flip the footplate up if necessary.
2
Pull the handle upwards (Fig. 7) and swing the legrest outwards
1
(Fig. 8).
In the outward position, the legrest can be pulled out by pulling it
upwards (Fig. 8).
Before setting off, fit the legrests as described above.
8.
58
58
| Lightweight wheelchair
Never stand on the footplate and when swinging
it away, watch your fingers as there is a risk of
pinching.
Lightweight wheelchair |
4.2.2. Adjusting
the
length
Loosen the screws, then adjust the legrest to the required length and
re-tighten the screws (Fig. 9).
4.3.

Angle-adjustable footplates

The angle of the footplates can be adjusted:
Unscrew the hexagon screw at the sprocket (see Fig. 10) Move the
footplate to the required position by rotating the sprocket.
Re-tighten the sprocket screw (see Fig. 10)
4.4.

Elevating legrests (optional)

Assemble, disassemble and swing them away as for the standard
legrests.
To adjust, undo the clamp lever, then adjust the legrest to the required
length and then tighten the clamp lever
The horizontal adjustment works as follows:
Upwards
by lifting the footplate receiver tube you can get the legrest into
the required position.
Downwards
Pull locking lever upwards
When doing this, hold the legrest firmly and move to the required
position
Release locking lever; legrest locks into place automatically.
Never stand on the footplate and when swinging
it away, watch your fingers as there is a risk of
pinching.
For transfer, the legrest must be swung away or
removed. Never sit on the legrest. Risk of tipping
over!
Bischoff & Bischoff GmbH |2021-09-06 - Revision: 1
Pyro Light Optima
Pyro Light Optima XL
lower
leg
9.
10.
59
59

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pyro light optima xl

Tabla de contenido