Hardware Specifications; Power Consumption - 3Com AP9152 Manual Del Usuario

1 Product Overview
Introduction
The AP9152 is an 802.11n access point (AP) product developed by 3Com Corporation.
The AP9152 can work either as a fat AP to provide wireless access independently or as
a fit AP that operates with a wireless local area network (WLAN) switch or access
controller to provide wireless access for WLAN clients. The factory default configuration
is fat AP mode, and you can change it to fit AP mode.

Hardware Specifications

The physical dimensions and weight of the AP9152:
Physical dimensions (diameter × thickness)
Φ190 × 60 mm (Φ7.48 × 2.36 in.)
Note: Φ means diameter.
The basic configurations of the AP9152:
Protocols and chassis material
IEEE 802.11a/b/g/n,
single-RF, plastic mold design
LEDs
Descriptions of the LEDs on the AP9152:
LED Color
POWER Green
10/100M
(Ethernet
Green
interface
LED)
1000M
(Ethernet
Green
interface
LED)
All manuals and user guides at all-guides.com
Internal antenna
2.4 GHz, gain: 6 dBi
5 GHz, gain: 7 dBi
State
Steady on The power supply is normal.
The power supply is poorly connected or is
Off
working abnormally.
Steady on A link is present.
Off No link is present.
Data is being transmitted or received at 10/100
Blinking
Mbps.
Steady on A link is present.
Off No link is present.
Data is being transmitted or received at 1000
Blinking
Mbps.
1
Weight
0.5 kg (1.10 lb)
Power
consumption
5.9 W to 7 W
Description