EMKO ESM-3700 Manual Del Usuario página 11

5.4 Entering To The Programming Mode, Changing and Saving Parameter
Main Operation Screen
When ENTER button is pressed
for 5 seconds. "P" led starts to
blink. If programming mode
entering password is different from
0, programming mode entering
screen is observed.
Note-1: If programming mode accessing password
is 0, process input type selection parameter
screen is observed instead of programming mode
accessing screen
Note-2: Parameters can be observed by
pressing ENTER button in programming mode
a c c e s s i n g s c r e e n w i t h o u t e n t e r i n g
programming mode accessing password. But
parameters can not be changed.
Password Entering Screen
Press ENTER button for
accessing to the parameters
Process Input Type
Selection Value
Change the value with increment
and decrement buttons
i
If no operation is performed in Programming mode for 20 seconds, device turns to
main operation screen automatically.
All manuals and user guides at all-guides.com
AS
P
ASET
AS
P
ASET
AS
P
ASET
Programming Screen
Programming Mode
Accessing Screen
Press increment
button for accessing
to the password
entering screen.
Password Entering Screen
Enter programming mode
accessing password with
increment and decrement
buttons
Programming Screen
Process Input Type
Selection Parameter
Press increment button for accessing
to the parameter value. Press ENTER
button for accessing to the next
parameter
Process Input Type
Selection Value
Press ENTER button for saving
the parameter value
AS
P
ASET
AS
P
ASET
AS
P
ASET
AS
P
ASET
11