Panel Mounting; Electrical Wiring Diagram - EMKO ESM-3700 Manual Del Usuario

2.3 Panel Mounting

1-Before mounting the device in your panel,
make sure that the cut-out is of the right
size.
2-Insert the device through the cut-out. If
the mounting clamps are on the unit, put out
them before inserting the unit to the panel.
2.4 Removing From the Panel
2.3 Panel Mounting
2

3. Electrical Wiring Diagram

All manuals and user guides at all-guides.com
1
1
2
c
1
3
3-Insert the unit in the panel cut-out from the front
side.
4- Insert the mounting clamps to the fixing
sockets that located left and right sides of device
and make the unit completely immobile within
the panel
Before starting to remove the unit from panel,
power off the unit and the related system.
1-Pull mounting clamps from left and right fixing
sockets.
2-Pull the unit through the front side of the panel
Universal Process Input
Z
( Voltage/Current)
Voltage Output
Z ( ± 35% )
12 V
Max. 30 mA
Supply Voltage Input
V
230 V
V
115 V
V
24 V ( ± %15 ) 50/60 Hz
W
24 V ( -%15, +%10 ) 50/60 Hz
(It must be determined in order)
Relay or SSR Driver Output
(This Output exist in device
with Alarm Output.)
For SSR Output
4
( ± %15 ) 50/60 Hz
( ± %15 ) 50/60 Hz
5