TRAPP TRP 40 Manual De Instrucciones página 48

Assembly of Grain Feeder
TRF 60 Model:
Place the grain feeder (1) over the green
✔
crop feeder (2), secure it with screw (3),
washer (4) and tighten with nut (5) through
the internal part of the green crop feeder (2).
To operate with green products
(foliage):
Remove the sealing cover (1).
✔
Remove the green crop feeder cover (4).
✔
Place the flat strainer (2), as the material will
✔
exit through the upper part of the shredder.
The green products are placed into the
✔
green crop feeder (3), and then forwarded to
be processed. The end product leaves the
shredder through the upper part.
In models TRP 40, TRF 60 and TRF 70, the
✔
processed material leaves through the lower
part.
The motor may burn due to overload
if an excessive amount of material is
introduced.
46
ENGLISH
Attention!