Maintenance Instructions - TRAPP TRP 40 Manual De Instrucciones

Shredder models TRP 40, TRF 60, TRF 70,
TRF 80 and TRF 80M are equipped with a
110/220 V voltage selector switch.
Note:
If necessary, the motor protection cover (as
shown in the figure) may be removed
for cleaning (dust) originated by the grain
grinding process.
To attach Rubber Cushions,
✔
proceed as per illustration.
Counter cutting blade
Periodic tightening of screws as well as the
adjustment of the counter cutting blades are
essential. The adjustment is done by loosening
the hexagon nut (1) as in figure 1 and
Fig. 1
Voltage Selector Switch
Rubber Cushions

Maintenance Instructions

48
ENGLISH
by displacing the counter cutting blade until
the cutting blades pass at a distance of
approximately 1,5 mm from the counter cutting
blade (figure 2).
The counter cutting blade shall be substituted
when worn out.
Fig. 2