Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
EN
3.4.6 Gear lever (7:J) (Man))
A lever for selecting one of the five forward gears
in the gearbox (1-2-3-4-5), neutral (N) or reverse
(R).
The clutch pedal must be kept pressed in when
changing gear.
NOTE! You must make sure the machine is quite
stationary before changing from reverse to forward
gear or vice versa. If a gear does not engage imme-
diately, release the clutch pedal and then press it in
once again. Engage the gear once again. Never
force a gear in.
3.4.7 Power take-off (7:E)
The power take-off must never be en-
gaged when the front-mounted imple-
ment is in transport position. This will
destroy the belt transmission.
A lever for engaging and disengaging the power
take-off for operating cutting decks and front-
mounted accessories. Two positions:
1.Forward position – power take-off dis-
engaged.
2. Backward position – power take-off en-
gaged.
3.4.8 Seat (9:L)
The seat can be folded and adjusted for-
wards and backwards. The seat's forward/
backward position can be locked with the
knobs (4:M).
The seat is equipped with a safety switch that is
connected to the machine's safety system. This
means that certain activities that can entail danger
cannot be carried out when nobody is sitting in the
seat. See also 5.3.2.
3.4.9 Engine casing (fig. 12)
To fill with fuel and to inspect and maintain the en-
gine and battery, open the engine casing.
The engine must not be running when
the casing is opened.
3.4.9.1 Opening
1. Ensure that the control arms are in their forward
positions.
2. Raise the seat lock (9:N) and fold the seat for-
wards.
3. Grasp the front edge of the engine casing and
fold up the casing (fig. 12).
50
ENGLISH
3.4.9.2 Closing
Grasp the front edge of the engine casing and fold
down the casing.
The machine may not be operated un-
less the engine casing is folded down.
Risk of burns and crushing injuries.
4 AREAS OF USE
The machine may only be used using genuine
GGP accessories, e.g.
Work
Accessories, GGP genuine
Mowing
Using mowing deck 85 C
Sweeping
Using brush unit. Dust guard is
recommended.
Snow clearance
Using snow blade or snow
thrower Snow chains and frame
weights are recommended.
Grass clipping and
Using towed collector 30" or
leaf collection
42".
Grass and leaf
Using dump cart Standard.
transport
The maximum vertical load on the towing hitch
must not exceed 100 N.
The maximum over-run load on the towing hitch
from towed accessories must not exceed 500 N.
NOTE! Before using a trailer – contact your insur-
ance company.
NOTE! This machine is not intended to be driven
on public roads.
5 STARTING AND OPERATION
The machine may not be operated un-
less the engine casing is closed and
locked. Risk of burns and crushing in-
juries.
5.1
FILLING WITH PETROL
Always use lead-free petrol. You must never use 2-
stroke petrol mixed with oil.
NOTE! Ordinary lead-free petrol is a perishable
and must not be stored for more than 30 days.
Environmental petrol can be used, i.e. alkylate pet-
rol. This type of petrol has a composition that is
less harmful for people and nature.
Petrol is highly inflammable. Always
store fuel in containers that are made
especially for this purpose.
Publicidad
