Installation Of The Monitor; Using The Videophone - Extel WEVP 630 E BIS Instrucciones De Uso E Instalación

b. Installation of the monitor
1. Put the wall carrier
2. Connect the wires coming from the
outdoor station and the opening
system.
3. Connect the adaptor plug
back of the monitor (without
connecting it to the power supply).
4. Fix the monitor
1
carrier .
2
5. Check that the installation is
complete and connect the adaptor
to the power supply.
NB : if the power supply cable is cut, check the polarity (black wire and black wire with grey
edging).
5. USAGE
b. Using the videophone
• Remove the screen protector and the outdoor station lens protector.
• A call from the outdoor station button triggers the ringer and causes the monitor to light up for about
thirty seconds. Once the visitor has been identified, press on the
NB : Pressing this key just once is enough to establish communication with the outdoor station.
• Once communication is over, either wait for the delay time (about two minutes) or turn the monitor
off using the key.
• To resume communication and bring the image back, press on the
• The catch or mechanism is activated using the
• To activate the alarm function, press on the
All manuals and user guides at all-guides.com
in place.
2
3
to the
3
to the wall
7EN
1
Three settings can be adjusted
from the side of the monitor:
1
• 1 - Brightness
• 2 - Colour
• 3 - Ringer volume and cut-off
2
Ringer selection:
With the monitor off, press
3
the
select one of the three
options.
key to establish communication.
key (monitor switched on).
key.
key (alarms on the monitor and outdoor station).
2
a. Settings
key repeatedly to
•
In
or
6
7
•
•
•
8
Yo
Th