All manuals and user guides at all-guides.com
T761 AND T781 ERROR MESSAGES
Error messages will display in the LCD window if a fault
occurs while a program is in progress. The table below
defines each possible error message. If the message still
ERROR MESSAGE
Maximum program time
Overflow (T781)
Sensor
Thermistor
SOLUTION
Make sure both fuses are intact.
Clean the lint filter.
Make sure exhaust hose is clear (T761).
Clear message by turning the power off then on.
Make sure the condensed water container is empty. If draining into a drain pipe, make
sure the black rubber hose is not kinked or blocked. The drain should not be higher
than 40 inches from the floor.
Make sure the condensation pump is not blocked.
This can appear if there are dry clothes in the drum when the unit is started. Cancel
the error message by opening the door or turning the power off then on.
Call a service technician.
displays after you have checked the possible solutions,
call a service technician.
Page 17