Safety - MedLinket AM-806 Manual De Instrucciones

2) There are nine display modes for your choice, See Figure 8. Figure 8.①-Figure
8.⑧ display SpO2 and pulse rate, Figure 8. ⑨ display SpO2, pulse rate and tem-
perature.
97
%SpO
2
①
%SpO
2
④
⑦

Safety

1) Safety
Instructions for safe operations
● Check the main unit and all accessories periodically to make sure that there is
no visible damage that may affect user's safety and monitoring performance. It is
recommended that the device should be inspected once a week at least. Please
stop using the device when there is obvious damage.
● Necessary maintenance must be performed by qualified service engineers
ONLY. Users are not permitted to maintain it by themselves.
● The oximeter cannot be used together with devices not specified in User's
Manual. Please use the device recommended by Manufacturer.
● Please remove the finger from the equipment to stop measure and pull the
accessories from the equipment, then the PULSE OXIMETER will power off auto-
matically within 8 seconds if the equipment must be closed for the urgent status.
2) Warnings
● Explosive hazard—DO NOT use the oximeter in environment with inflammable
gas such as some ignitable anesthetic agents.
● DO NOT use the oximeter while the testee is under measurement of MRI and
CT.
● Be cautious of the cable. Please do not break the cable during usage to avoid
device damage. Please don't use cable if allergic to cable.
● Please don't use this product if you are allergic to silicone pad and ABS plastic.
● Please dispose the device, accessory and packing (including plastic bag, foam
and carton) according to local law.
75
%SpO
BPM
2
BPM
Figure 8
English 13
%SpO
BPM
②
⑤
96.8
TEMP
⑧
97
75
BPM
2
③
⑥
97
%SpO
2
℉
75
BPm
⑨