Foreword; Warning - MedLinket AM-806 Manual De Instrucciones

The Pulse Oximeter manual is intended to provide information for proper operation
and maintenance. General knowledge of monitoring and understanding of the
features and functions of the Pulse Oximeter are prerequisites for proper use. Please
read these instructions carefully before using this equipment.
The manual describing the operating procedures should be followed strictly. Failure to
follow these instructions can cause measuring abnormality, equipment damage and
personal injury. The manufacturer is NOT responsible for the safety, reliability and
performance issues and any monitoring abnormality, personal injury and equipment
damage due to user's negligence of the operation instructions.
Warnings are identified by the WARNING symbol shown above.
● Explosion hazard. Do not use the PULSE OXIMETER in the presence of flammable
anesthetics mixed with air, or with oxygen, or nitrous oxide.
● Do not spray, pour, or spill any liquid on the PULSE OXIMETER and its accessories.
● Reusable sensors must be moved to a new site at least every 4 hours. Because
individual skin condition affects the ability of the skin to tolerate sensor
placement, it may be necessary to change the sensor site more frequently with
some users. If skin integrity changes, move the sensor to another site.
● At elevated ambient temperatures, users skin could be severely burned after
prolonged sensor application at sites that are not well perfused. To prevent
this,be sure to check users application sites frequently. The temperature of the
sensor contacting with skin won't exceed 105.8
doesn't exceed 95
● Be aware that following removal of the sensor from the users, it is possible that
environmental light may cause the oximeter device to continue to display a
waveform or data values but these data should not be used as a basis for a
clinical diagnosis.
● Portable and mobile RF communications equipment can affect MEDICAL
ELECTRICAL EQUIPMENT.
The waste of PULSE OXIMETER must not be disposed as unsorted municipal
waste and must be collected separately. Please contact an authorized
representative of the manufacturer for information concerning the disposal of
your equipment.
● This device is not intended for treatment.
● The LCD panel contains toxic chemicals. Do not ingest chemicals from a broken
LCD panel.
● Do not modify this equipment without authorization of the manufacturer.

Foreword

Warning

.
℉
English 3
if the initial skin temperature
℉