MedLinket AM-806 Manual De Instrucciones página 16

Setting enter
Long press the button to enter the
interface of settings.
The setting interface of PULSE OXIME-
TER includes "Alm Setup 1", "Alm Setup
2" and "Sounds Setup".
Setting enter
and exit
Exit PULSE OXIMETER setting interface
● Short press the button, move the
cursor to select the item of "Exit", long
press the button to return to the POST
display.
"Alm" on or off setting
● Short press the menu button to enter
the interface of settings of "Alm Setup
1". Move the cursor to select the item
"Alm" on or of "Alm", and then long press the button
off setting
to turn the functions on or off.
● Short press the button, move the
cursor to select the item of "Exit", and
then long press the button to return to
the POST display.
"Beep" on or off setting
Short press the button, move the cursor
"Beep" on or
to select the item of "Beep", and then
off setting
long press the button to turn the func-
tions on or off.
Default setting
Short press the button, move the cursor
to select the item of "Restore", then long
press the button to return the PULSE
OXIMETER to factory default setting.
After completing the setting, the inter-
Default
face will indicate "OK".
setting
Move the cursor to select the item of
"Exit" by short press the button, and
then long press the button to return to
the POST display.
SpO2 High Limit setting
Long press the button to enter the
interface of settings of "Alm Setup 2".
Short press the button, move the cursor
SpO2 High
to select the item of "SpO2 Alm Hi",
Limit setting
long press the button to adjust the
parameter of SpO2 in the scope of 52%
to 100%.
The default upper limit is 100%.
English 15